Download our commercial brochure

Download our catalog

Download Technical Sheet

ALU GREASE - Aerosol 650/400mL

Reference: LUBALU

€9.90 Tax excluded
€11.88 tax incl.

Delivery within 48-72 hours max

Facilitates the assembly, allows the disassembly of components and assemblies, having been subjected to high temperatures, or in aggressive environment. Usable and effective in thin layers.

Description
Technical Data

Description

Excellent dynamic filmability. Allows a static surface treatment for life. Guaranteed metal salt free, metalloid free, nitrite free. Lubricant and anticorrosion at high temperature. Effective in static and in the presence of vibratory phenomena. Do not use on bearings or rollers with slow movements, without a frequent supply of lubricant.

FIELDS OF USE

Screwed assemblies including with destruction of the thread geometry.
Steam fittings. Cable glands. Mechanical seals.
Impregnation of sealing braids. O-rings.
Plain bearings for hot bending machines. Valves on heaters.
Turbines. Combustion engines. Compressors. Gas generators. Foundry ejectors.
Aluminum extrusion (start-up before post-production). Demoulding of zamak.
Vulcanizing mold closures. Furnace hinges.
Ingot tongs.
Bogie clamps. Brake calipers.
Spot welding machine jaws.

DIRECTIONS FOR USE

Shake the aerosol up and down for a few moments, after the ball in the can has been removed. Degrease beforehand and if necessary the parts to be treated with the Degreaser FLASH aerosol. Spray from 15 to 25 cm depending on their size.
Dangerous. Respect the precautions of use

TYPICAL PHYSICO-CHEMICAL CHARACTERISTICS

PHYSICAL CHARACTERISTICS OF THE GREASE

CHARACTERISTIC	STANDARD or METHOD	VALUE	UNIT
Appearance	Visual	Paste	-
Color	Visual	Aluminum	-
Bulk density at 25°C (Pycnometer)	NF T 30 020	990	Kg/m³
NLGI Class	NLGI National Lubricating Grease Institute	2	Classification according to penetrability
Soap/Greaser	-	Inorganic	-
Nature of solid lubricants	-	Graphite / Aluminium	12%
Penetrability at 25°C Not worked Worked, 60 strokes Worked, 1000 strokes Worked, 10 000 strokes Worked, 100 000 strokes	NF ISO 2137 / ASTM 2176	265-295 265-295 265-295 275-305 275-305	1/10° mm 1/10° mm 1/10° mm 1/10° mm 1/10° mm
Dropping point Dropping point if higher than 360°C	NF ISO 2176 / ASTM D 566 ASTM D 2265	>250 -	°C
Impurities > 25μm > 75μm > 125μm	FMTS 791 3005	nm nm nm	nb/ml nb/ml nb/ml

PHYSICO-CHEMICAL CHARACTERISTICS OF THE BASE OIL

CHARACTERISTIC	STANDARD or METHOD	VALUE	UNIT
Nature of the base oil	-	Polymer	-
Kinematic viscosity at 40°C Kinematic viscosity at 100°C	NF EN ISO 3104	140 100	mm/s - ¹ mm/s - ¹
Acid number Ia	NF ISO 6618	0.38	mg KOH/l

PERFORMANCE CHARACTERISTICS

CHARACTERISTIC	STANDARD or METHOD	VALUE	UNIT
Oil separation 7 days at 40°C (dye penetration)	NF T 60 191	0	% of mass
Oil separation 24H at 41kPa (pressure penetration)	ASTM D 1742
Sulphated ash	NF T 60 144	1
Copper blade corrosion	ASTM D 4048	1a
Hoffman oxidation	ASTM D 942
Loss by evaporation 22h at 121°C	ASTM D 972	0
Evaporation loss Noack	NF T 60 101 CEC L-40 A-93 ASTM D5800
Swelling on elastomers 70h at 100°C	ASTM D 4289.83
Temperature ranges static continuous peak	- -	-20 +900 -20 +1000	°C
Rotation factor	n.dm	80.000	mm.min-1
4-ball test Cavity diameter Weld load index	ASTM D 2266 / ISO 20 623	0.60 4000	mm daN
Test TIMKEN	ASTM D 2509	40	Ibs
Rust test EMCOR Dynamic Static	NF T 60 135 ISO DP 6294/ ASTM D 1743	0 2	Rating
Resistance to water washout at 80°C	ASTM 1264		% of mass

*not measured or not measurable

Notes

Oprodis declines all responsibility for any damage caused by improper use of the product.
Keep out of reach of children. For chemicals, Safety Data Sheet available on request.