€7.08 with taxes
MEDIUM BLUE BRAKE - 50GR bottle
€17.88 tax incl.
Formulated to prevent loosening due to vibration and to seal threaded components. Due to the low torque required for removal, particularly suitable for small threaded parts (
- Chemical nature: Dimethacrylate
- Appearance : Brown
- Density : 1,05
- Viscosity cPs (1):
- Range : 400-600
- Typical value : 500
- Loosening torque (N.m) (2):
- Interval : 6-12
- Typical : 9
- Permanent torque (N.m) (2):
- Interval: 2-7
- Typical : 5
- Setting time (3) : 15 min
- Total cure at 20°C : 24 hours
- Flash point : > 100 °C
- Shelf life at 20°C : 12 months
Max filling interval : 0,20 mm
- Operating temperature range: -50°C to +150°C
(1) Brookfield LVF, spindle 2, 2.5 rpm
(2) On M10 steel bolts with black oxide coating and on M10 bright steel nuts, ISO10964
(3) ISO 10964
Typical cure rate(3), % of final strength :
- 15 min: Hand-tight
- 1 hour : Strength ~50
- 24 hrs: 100% strength
Resistance to chemicals and solvents
Anaerobic adhesives have excellent resistance to most oils and solvents, including motor oil, leaded gasoline, brake fluids, acetone, ethanol, propanol and water. Anaerobic adhesives and sealants are not recommended for use in pure oxygen or chlorine lines.
For safe handling of this product, consult the Product Safety Data Sheet.
Anaerobic adhesives cure only in the absence of air and with activation of metal parts. The adhesive on the outside of the joint will remain uncured and can be wiped off with a cloth.
Suitable for most pipe threads with fine to medium pitches, and diameters up to 15 mm. Will not cure outside of the fitting and is virtually non-smearing on most hydraulic systems. Not recommended on some plastics, as stress cracking can sometimes occur. Some corrosion inhibiting chemicals neutralize the curing system in this type of anaerobic adhesive. Testing is recommended to determine if cleaning is necessary. An activator may be required on plated parts.
INSTRUCTIONS FOR USE
Ensure parts are clean, dry and free of oil and grease.
Apply by hand in a continuous bead or by silk-screening on a surface. Assemble parts and allow to cure. Wipe excess adhesive from the outside of the joint.
Oprodis declines all responsibility for any damage caused by improper use of the product.
Keep out of reach of children. For chemicals, Safety Data Sheet available on request.
- 0.08 kg
- In stock
- 9 Items
- Catalog page
10 other products in the same category:
€7.08 with taxes
€31.08 with taxes
€17.88 with taxes
€21.48 with taxes
€11.88 with taxes
€16.68 with taxes
€10.68 with taxes
€23.88 with taxes
€19.08 with taxes
€13.08 with taxes