EPOXY RESIN GLUE - 25mL Syringe

Very clear, two-component structural adhesive based on epoxy resins, semi-solid, very fast setting, for bonding various materials, especially raw or pre-treated metal substrates, laminates, polyester, thermal insulation (PU or rigid PVC foam, polystyrene, glass foam, mineral wools), plywood, concrete, marble and certain rigid thermoplastic materials such as ABS, PVC or various thermosetting and sealed materials.

PROPERTIES

• Chemical base resin: Epoxy
• Chemical base hardener: Amine type
• Appearance : Yellowish transparent
• Density : 1.15 g/cm3
• Viscosity cPs (typical value) : 19 000 cps
• Shore D hardness : 80
• Total hardening (at 20°C) : 24 hours
• Thermal resistance : -40°C / +130°C
• Flash point : >100°C
• Setting time : 2min
• Shelf life (at 20°C) : 24 months

DIRECTIONS FOR USE

1. Degrease surfaces before application.
2. Mix carefully both components to obtain a perfectly homogeneous mixture.
3. Apply one or more beads on one of the two materials to be joined.
4. Apply light holding pressure for a short time.
5. Wipe off excess adhesive with a solvent.