ANAEROBIC SINGLE COMPONENT GLUE - Syringe 25GR

Cures slowly, has good vibration resistance, and is designed for all flat seals.
The thixotropic nature of the product prevents it from flowing, dripping and migrating after assembly.

• COLANA will provide an instant seal.
• Anaerobic adhesives cure only in the absence of air and the presence of metal. The adhesive on the outside of the joint will remain uncured and can be wiped off with a cloth.
• Excellent resistance to most oils and solvents, including motor oil, gasoline, brake fluids, acetone, ethanol, propanol and water.

Also available in 300g cartridges.

PROPERTIES

• Chemical base: Dimethacrylate
• Appearance: Purple
• Density : 1.09 g/cm3
• Viscosity cPs (typical value) : 110,000 cps
• Loosening torque : 17 N.m
• Permanent torque : 7 N.m
• Total curing (at 20°C) : 24 hours
• Thermal resistance : -50°C / +180° C
• Flash point : C >100°C
• Setting time : 35 min
• Max filling interval : 0.50 mm
• Shelf life (at 20°C) : 18 months

DIRECTIONS FOR USE

• Degrease surfaces before application.
• Apply as a continuous bead or by silk-screening on the surface.
• Assemble parts and allow to cure.
• Wipe off excess adhesive on the outside

An activator can be used to accelerate the cure.