BLACK SILICONE MASTIC - 200mL cartridge

MASTICNN has good oil resistance at operating temperatures and excellent resistance to vibration and repeated expansion.

• Offers superior strength in the temperature range of -50°C to +250°C.
• Withstands severe outdoor conditions.
• Resistant to mineral and synthetic oils.
• Dries quickly to the touch (10 minutes), fully cured in 24 to 72 hours depending on joint thickness.
• Is non-conductive.
• Adheres perfectly to its support (metal, glass, rubber, plastic, wood, ceramic), even vertically, equalizes surfaces.

PROPERTIES

• Chemical base: Neutral silicone oxime
• Appearance : BLACK
• Density : 1.20 g/cm3
• Viscosity cPs : Thixotropic
• Skin formation : 8min at room temperature (+23°C)
• Polymerization : 2mm / 24 hours
• Total curing (at 20°C) : 24 hours
• Thermal resistance : -50°C / 250°C, 300°C peak
• Breaking strength : 3,3 N/mm²
• Elongation at break: 300%
• Shelf life (at 20°C) : 24 months

DIRECTIONS FOR USE

1. Degrease surfaces before application.
2. Apply the joint to the desired shape on one of the parts to be joined.
3. Wait 10 minutes for surface drying before joining.
4. After use, allow 1 cm of joint to pass through the end of the applicator tube and replace the safety ring
5. For easy removal, lightly oil the surfaces to be sealed.