ANAEROBIC SEALANT - 75GR accordion bottle

It provides medium resistance to unscrewing, but has a lower torque on fittings, so it can be disassembled and serviced more easily.

• FILETANCHE will seal almost instantly at low pressure and, when fully cured, will seal up to the burst pressure of the pipe.
• Anaerobic adhesives cure only in the absence of air and the presence of metal. The adhesive on the outside of the joint will remain uncured and can be wiped off with a cloth.
• Excellent resistance to most oils and solvents, including motor oil, gasoline, brake fluids, acetone, ethanol, propanol and water.

PROPERTIES

• Chemical base: Dimethacrylate
• Appearance : Yellow
• Density : 1.06 g/cm3
• Viscosity cPs (typical value) : 48000 cps
• Loosening torque : 16 N.m
• Permanent torque : 7 N.m
• Total curing (at 20°C) : 24 hours
• Thermal resistance : -50°C / +150°C
• Flash point : >100°C
• Setting time : 15 min
• Max filling interval : 0.25 mm
• Shelf life (at 20°C) : 18 months

DIRECTIONS FOR USE

1. Degrease surfaces before application.
2. Apply as a continuous bead or by silk-screening on the surface.
3. Assemble parts and allow to cure.
4. Wipe off excess adhesive on the outside.

An activator can be used to accelerate the cure