ANAEROBIC FIXING GLUE - 50GR bottle

Typical applications include the bonding of gears, rotors, bearings, rings on shafts.
FIXROUL prevents corrosion of assembled parts.

• FIXROUL is designed to increase the strength of assembled parts. Once the product is applied, the parts fit together easily, being lubricated by the adhesive.
• Anaerobic adhesives only cure in the absence of air and the presence of metal. The adhesive on the outside of the joint will remain uncured and can be wiped off with a cloth.
• Excellent resistance to most oils and solvents, including motor oil, gasoline, brake fluids, acetone, ethanol, propanol and water.

PROPERTIES

• Chemical base Dimethacrylate
• Appearance Green
• Density 1.06 g/cm3
• Viscosity cPs (typical value) 125 cps
• Loosening torque 32 N.m
• Permanent torque 26 N.m
• Total hardening (at 20°C) 24 hours
• Thermal resistance -50°C / +150°
• Flash point C >100°C
• Setting time 10 min
• Max filling interval 0.20 mm
• Shelf life (at 20°C) 18 months

DIRECTIONS FOR USE

1. Degrease surfaces before application.
2. Apply as a continuous bead or by silk-screening on the surface.
3. Assemble parts and allow to cure.
4. Wipe off excess adhesive on the outside.

An activator can be used to accelerate the cure.